Zoom - Conversion Capers
This article was scanned from Zoom magazine Issue #56. It outlines some of the problems and issues that may arise when retaining the factory engine management for engine conversions into old cars. The example used is a CA18DET into Datsun 1200.
 |
Page One Introduction and 'Front cut or engine package' discussion 700 x 914 pixels - 203 kb |
 |
Page Two 1 image - CA18DET fitted in Datsun 1200 engine bay 700 x 467 pixels - 129 kb |
 |
Page Three Front cut vs engine package continued, 'Load mounting' 700 x 462 pixels -138 kb |
 |
Page Four 'Load mounting' continued, 'Sensor chops'. 700 x 939 pixels -271 kb |
 |
Page Five 'Sensor chops' continued, 'Fuel system' and 'Boost up'. 700 x 459 pixels -130 kb |
 |
Page Six 'Boost up' continued, 'Power and earth' and 'This tells us'. 700 x 468 pixels -147 kb |
home | editors cars | readers rides | technical | gallery | media | videos | links | contact | sitemap
